Composites

Composite materials are often preferred to conventional materials, such as metals and ceramics, due to their high specific strength, lightweight, ease of fabrication, design flexibility, resistance to fatigue and corrosion, and low cost. Here, you can find a selection of recent studies on the manufacturing, characterization, and application of composites.

Article Digest

Designer Glasses — Future of Photonic Device Platforms

The effect of an ultrafast laser on different commercial silicate glasses with various compositions was studied, and a designer glass composition for photonic applications was fabricated using an empirical formula.

Abstract

Characterization of the Foreign Body Response of Titanium Implants Modified with Polyphenolic Coatings

Surface coatings made of antioxidant polyphenolic molecules tannic acid (TA) and pyrogallol (PG) were found to improve hemocompatibility and reduce oxidative stress during wound healing but did not have anti-inflammatory effects on human gingival fibroblasts.

Abstract

Microstructural Evolution of Amorphous Self-healing Geopolymer Composites Containing Alumina and Glass Frit

Geopolymers are X-ray amorphous, corrosion resistant, and refractory materials made from industrial waste ash, volcanic rock, or calcined clay, with the addition of alumina platelets and glass frit, which was studied in this research and shown to reduce linear shrinkage and form an open porosity of less than 1% with a uniform surface glaze of 250 μm thickness.

Abstract

A 3D-Bioprinted Functional Module Based on Decellularized Extracellular Matrix Bioink for Periodontal Regeneration

This paper demonstrates the effectiveness and feasibility of 3D bioprinting combined with a dental follicle-specific dECM bioink for periodontium regeneration.

Abstract

Surfaces Decorated with Enantiomorphically Pure Polymer Nanohelices via Hierarchical Chirality Transfer across Multiple Length Scales

During chemical vapor deposition (CVD) of chiral precursors into cholesteric LC films, aspects of molecular and mesoscale asymmetry combine constructively to form regularly twisted nanohelices. Enantiomorphic surfaces permit the tailoring of a wide range of functional properties, such as the asymmetric induction of weak chiral systems.

Abstract

Emerging methods in biomarker identification for extracellular vesicle-based liquid biopsy

This article aims to present an overview of current EV assessment techniques, with a focus on their progress and limitations, as well as an outlook on the clinical translation of an EV-based liquid biopsy that may augment current paradigms for the diagnosis, prognosis, and monitoring the response to therapy in a variety of disease settings.

Abstract

Microstyling of Biofluorescence in Human Hair as Sustainable and Functional Waste

This work's simple yet impactful consequence lays the foundation on which the industrial applicability of the functionalized human hair waste can be achieved, realizing a possible cyclical economy through sustainable resources.

News

Evident InSight Blog

Insightful blogs on composites, corrosion, electronics, geoscience, instrumentation, particles, and more!

Abstract

Magnetoresponsive Optical Fiber with Fuse-Effect-Induced Fluorinated Graphene Oxide Core

A magnetic field sensor using the fused POF is developed, and a maximum sensitivity of 4.66 pm Oe−1 (for the range of 0–400 Oe) is obtained, which is one of the top records among the previous literature.

Abstract

A Facile, Fabric Compatible, and Flexible Borophene Nanocomposites for Self-powered Smart Assistive and Wound Healing Applications

B-TENG not only demonstrates great potential for multifunctional self-powered healthcare sensors, but also for the promising advancements toward wearable medical assistive and therapeutic systems.

Abstract

Strain Monitoring in Reduced Graphene Oxide-coated Glass Fiber/Epoxy Composite

The composite showed low hysteresis and low electrical viscosity which make these materials suitable for industrial piezoresistive strain sensors.

Abstract

Effect of Synergy between Pyrolysis Carbon Black and Carbon Nanofibers on Composite properties

This study provides new ideas for polymer composite processing.

  Registration
  required

Video

Deep Learning: Even a Machine Brain Needs Training

In this online seminar you can learn how to train a neuronal network in the Olympus Stream software.

Abstract

Preparation of Electrosprayed Composite Coated Microporous Filter for Particulate Matter Capture

Particulate matter 2.5 pollution is a serious threat to human health. In this paper, the use of electrospraying technology to fabricate composite polytetrafluoroethylene/expanded graphite coated spun-bond polypropylene microporous filters that show tremendous potential for its use as an effective PM 2.5. capture medium is presented.

Abstract

Laser Pyrolyzed Organosilazane-based Al/ZrO2 Composite Coating on Stainless Steel: Resulting Microstructure and Mechanical Properties

Protective ceramic-based coatings are frequently the most suitable solutions for problems like corrosion and wear.

News

Ask the Experts: Digital Image Processing

Want to get a better understanding of digital image processing techniques? Then watch the Ask the Experts webinar rerun on July 29 to learn how point and local operation filters can be used to control sources of error such as noise or low contrast in microscopy images.

  Registration
  required

ebook

Compendium: Manufacturing and Inspection of Advanced Materials

This free eBook covers the evolving fields of additive manufacturing, thin films, electronics, surface roughness, and composites. In more than 20 article digests, you can learn about the recent developments in the manufacturing and inspection of novel materials using confocal laser scanning microscopy together with other analytical techniques.

Abstract

Advanced Production Routes for Metal Matrix Composites

The use of metal matrix composites (MMCs) in a variety of products is significantly increasing with time. However, the future usage of MMC products is very much dependent on their beneficial aspects and hence it is critical to ensure in a robust repeatable manner the superior physical property advantages. This article provides an overview of advanced production routes for MMCs.

Abstract

A Review on Direct Assembly of Through‐the‐thickness Reinforced Metal–polymer Composite Hybrid Structures

The current status and state‐of‐art direct assembling technologies are reviewed in this article. Examples of reviewed metal structuring techniques include micromachining, stamping, Surfi‐Sculpt, additive manufacturing, cold metal transfer, and metal injection molding structuring.

Abstract

Halide Perovskite Composites for Photocatalysis: A Mini Review

This mini review summarizes the recent progresses on the design and development of halide perovskite composites for various photocatalytic reactions.

Abstract

Residual Stress in Fiber Reinforced Thermosetting Composites: A Review of Measurement Techniques

The aim of this article is to provide an up to date review of the current state of the art in experimental techniques for the determination of residual stress in thermosetting fiber reinforced composites.

Abstract

On the Molecular to Continuum Modeling of Fiber‐Reinforced Composites

A multiscale approach to model fiber‐reinforced composites, those that are characterized by an isotropic orientation of fibers, is presented.

Article Digest

Mechanical Properties and Slurry Erosion Resistance of a Hybrid Composite SiC Foam/SiC Particles/EP

A novel composite, SiC foam/SiC particles/EP (SiCfoam/SiCp/EP), was prepared, consisting of an E‐51 epoxy resin (EP) as the matrix and SiC foam/SiC particles as the reinforcements.

Article Digest

In Situ Integration of SERS Sensors for On‐Chip Catalytic Reactions

A graphene-based catalytic chip with surface‐enhanced Raman scattering (SERS) sensors was fabricated by laser scribing of a graphene oxide (GO)–silver nanoparticle (AgNP) composite (AgNPs@GO).

Article Digest

Micro‐Structuration of Piezoelectric Composites Using Dielectrophoresis: Toward Application in Condition Monitoring of Bearings

A piezoelectric composite was fabricated for use as an aerospace and aeronautical monitoring sensor. The designed piezoelectric element integrated into an aircraft ball bearing could detect local vibrations indicative of imminent bearing failure.

Abstract

Laminated Object Manufacturing of Ceramic‐Based Materials

In this review article, a detailed evaluation of the applicability of laminated object manufacturing in the near net shaping ceramic‐based materials is presented.

Abstract

Additive Manufacturing of Polymer Matrix Composite Materials with Aligned or Organized Filler Material

This article reviews the combinations of fabrication and filler material alignment methods used to fabricate polymer matrix composite materials, in terms of operating and design parameters including size, resolution, print speed, filler material alignment time, polymer matrix and filler material requirements, and filler manipulation requirements.

Article Digest

Wettability of Low Weight Borides by Commercial Aluminum Alloys − A Basis for Metal Matrix Composite Fabrication

The wetting behavior of five boride substrates by liquid pure aluminum (99.5%) and and an aluminum alloy was investigated.

Article

Composite Types and Inspection Solutions

Manufacturers, engineers, and researchers continuously develop composites consisting of a wide variety of materials for a broad spectrum of applications. The two constituents of a composite are the matrix and reinforcement, whereby the matrix surrounds and binds the reinforcement.

  Registration
  required

ebook

eBook 6: Composites

In this eBook, recent studies on the development of novel composite materials and the application of confocal laser-scanning microscopy as well as other methods to analyze their surface morphology are presented.

Abstract

Effect of High‐Energy Ball Milling on Mechanical Properties of the Mg–Nb Composites Fabricated through Powder Metallurgy Process

New biocompatible and biodegradable Mg–Nb composites used as bone implant materials are fabricated through powder metallurgy process.

Abstract

Poly(Lactic Acid)–Thermoplastic Starch–Cotton Composites: Starch‐compatibilizing Effects and Composite Biodegradability

In this study, PLA was reinforced with natural cotton and thermoplastic starch to obtain a biodegradable and lower cost composite.

Abstract

An Investigation on the Mechanical and Tribological Properties of Carbon Fiber/Polyimide Composites at Elevated Temperatures

Carbon fiber reinforced thermoplastic polyimide composites were prepared, and the mechanical properties and tribological behaviors at various sliding conditions were systematically investigated.

Abstract

Comparative Structural and Mechanical Studies on Polyamide 6 Knitted‐Reinforced Single Polymer Composites Prepared by Different Reactive Processing Techniques

Single polymer laminate composites based on anionic polyamide 6 matrix‐reinforced by PA6 knitted textile structures were produced by nylon reactive injection molding and powder coating/compression molding processing techniques.

Abstract

Mechanical and Thermal Properties of Fishbone‐based Epoxy Composites: The Effects of Thermal Treatment

In this work, the fishbone particles were used in epoxy composites for the semi‐structural applications.

Abstract

Thermoplastic Polyvinyl Alcohol/Multiwalled Carbon Nanotube Composites: Preparation, Mechanical Properties, Thermal Properties, and Electromagnetic Shielding Effectiveness

This study uses the solution mixing method to combine plasticized polyvinyl alcohol as a matrix, and multiwalled carbon nanotubes as reinforcement to form PVA/MWCNTs films.

Abstract

Achieving Pseudo‐Ductile Behavior of Carbon Fiber Reinforced Polymer Composites via Interfacial Engineering

This article presents an investigation of the properties of interfacial engineered carbon fiber reinforced polymer composites.

Abstract

Seeing is Believing: In Situ/Operando Optical Microscopy for Probing Electrochemical Energy Systems

This review discusses a range of in situ/operando techniques based on optical microscopy reported in literatures for studying electrochemical energy systems.

  Registration
  required

Video

Webinar: Confocal Technology - What you do not dare to ask

Learn all about confocal technology in this online seminar by Markus Fabich, Olympus.

Abstract

Polymer‐Based Low‐Temperature Thermoelectric Composites

Thermoelectric materials allow direct conversion of waste heat energy into electrical energy, thus contributing to solving energy related issues. In this review article, the most promising research in the field is highlighted and thoroughly analyzed.

Abstract

Evolving Strategies for Producing Multiscale Graphene‐Enhanced Fiber‐Reinforced Polymer Composites for Smart Structural Applications

The primary focus of this review article concerns the structural graphene‐enhanced fiber‐reinforced polymer composites and discussion on the corresponding manufacturing methodologies for the effective incorporation of graphene into these systems.

Abstract

Direct Assembly of Through‐the‐thickness Reinforced Metal–polymer Composite Hybrid Structures

Constant efforts to reduce the structural weight of transportation systems as a solution to control emission levels are currently shaping the way modern cars and airplanes are designed and manufactured.

Abstract

Processing of Fiber‐reinforced Ultra‐high Temperature Ceramic Composites

Ultra‐high temperature ceramics have emerged as promising materials for high‐temperature aerospace applications due to their high melting temperature and superior ablation performance. Even still, they have yet to reach their full potential due to the catastrophic brittle failure that typically accompanies the intrinsic low fracture toughness of ceramic materials.

Abstract

Compression Fatigue Testing Setups for Composites

This review provides an overview of existing methods for the characterization of composites, i.e., setups for testing fiber reinforced polymer composites under compression and discusses their applicability to fatigue testing.

Abstract

Reinforcing the Near Eutectic Aluminum–Silicon Alloy with Graphene: An Approach toward Self‐Lubricating Composite

Herein, the reinforcement of near eutectic Al–Si (ADC12) alloy with the reduced graphene oxide (rGO) is demonstrated. The structural, mechanical, metallurgical, and tribological characteristics are conducted to understand the role of rGO as a reinforcement phase.

Abstract

Biodegradation of Polyurethane‐polyhydroxybutyrate Elastomeric Composite Investigated From Morphological and Structural Viewpoint

Morphological, structural, and tensile changes of polyurethane‐poly(3‐hydroxybutyrate) (PU‐PHB) elastomeric composites were evaluated after accelerated test in standard compost media. Size of PHB particles together with their uniform dispersion in the matrix were found to be key parameters for material's resistivity against degradation media.

Article Digest

Nanodiamond‐Based Separators for Supercapacitors Realized on Paper Substrates

Herein, a scalable, low-cost, and easy-to-process approach for the preparation of supercapacitors using large area techniques like spray and blade coating is presented.

Video

Advanced Optical Metrology Hub Video

Get a glimpse of what the Advanced Optical Metrology Hub has to offer in this short video!