12.05.2020 •

Flexible Micropillar Electrode Arrays for In Vivo Neural Activity Recordings

Abstract

Flexible electronics that can form tight interfaces with neural tissues hold great promise for improving the diagnosis and treatment of neurological disorders and advancing brain/machine interfaces. Here, the facile fabrication of a novel flexible micropillar electrode array (μPEA) is described based on a biotemplate method. The flexible and compliant μPEA can readily integrate with the soft surface of a rat cerebral cortex. Moreover, the recording sites of the μPEA consist of protruding micropillars with nanoscale surface roughness that ensure tight interfacing and efficient electrical coupling with the nervous system. As a result, the flexible μPEA allows for in vivo multichannel recordings of epileptiform activity with a high signal‐to‐noise ratio of 252 ± 35. The ease of preparation, high flexibility, and biocompatibility make the μPEA an attractive tool for in vivo spatiotemporal mapping of neural activity.

Read a digest of this article here!

Full article:

Small

Source: Preview Image: Sebastian Kaulitzki/Shutterstock

Related articles

Super-Resolution Microscopy by Movable Thin Films with Embedded Microspheres
Article Digest

Super-Resolution Microscopy by Movable Thin Films with Embedded Microspheres

Microsphere-assisted imaging has emerged as a simple technique to obtain optical super-resolution. This work addresses the methodology of the resolution measurements and the limited field-of-view provided by each sphere.
Boosted UV Photodetection Performance in Chemically Etched Amorphous Gallium(III) Oxide Thin-Film Transistors
Article Digest

Boosted UV Photodetection Performance in Chemically Etched Amorphous Gallium(III) Oxide Thin-Film Transistors

Bottom-gate amorphous gallium oxide thin-film transistors (TFTs) were fabricated to boost their UV photodetection properties. A simple chemical-etching solution was employed that is easy to use, low cost, and compatible with traditional lithographic processes to selectively etch a-Gallium(III) oxide films.
Multiscale and Uniform Liquid Metal Thin‐Film Patterning Based on Soft Lithography for 3D Heterogeneous Integrated Soft Microsystems: Additive Stamping and Subtractive Reverse Stamping
Article Digest

Multiscale and Uniform Liquid Metal Thin‐Film Patterning Based on Soft Lithography for 3D Heterogeneous Integrated Soft Microsystems: Additive Stamping and Subtractive Reverse Stamping

This paper demonstrates multiscale and uniform EGaIn thin‐film patterning by utilizing an additive stamping process for large‐scale soft electronics and a subtractive reverse stamping process for microscale soft electronics.
Breathable and Flexible Polymer Membranes with Mechanoresponsive Electrical Resistance
Article Digest

Breathable and Flexible Polymer Membranes with Mechanoresponsive Electrical Resistance

Flexible low-resistance membranes that tolerate very high deformability, produce low joule heating, and allow the passage of gases for human comfort are desired for wearable devices. Herein, a network of silver nanowires
(AgNWs) between two highly porous electrospun thermoplastic polyurethane (TPU) membranes is presented.
Flexible Thin-Film Electronics
Article Digest

Flexible Thin-Film Electronics

Fast-forward and electronics are ubiquitous throughout our lives. Most electronic devices are composed of rigid circuit boards containing electronic components (e.g., transistors, resistors, and capacitors), and printed metallic interconnects. Now, flexible electronics are currently being developed for next-generation devices.
Film Adhesion of Flexible Electronics Influenced by Interlayers
Article Digest

Film Adhesion of Flexible Electronics Influenced by Interlayers

Compression-induced delamination is a technique that uses the buckling dimensions to evaluate the interfacial adhesion of materials on flexible substrates quantitatively. This study shows that spontaneous buckles are formed in gold (Au) films, which are deposited without an interlayer. Conversely, external loading is required to delaminate the Au film with the tantalum (Ta) adhesion layer indicating higher adhesion energy.